wrightway2MT® ... ADVANCED SAFETY FEATURES

The Australian Designed, Owned and Manufactured wrightway2MT® is the ‘right way to empty’ and ticks all the boxes for a safe, efficient & economical bin tipping machine. •  Independently certified •  Meets or exceeds Australian guarding and electrical standards •  Independent Structural Engineers’ Certification •  NATA approved certification SWL (Safe Working Load) •  Designed, owned and manufactured in Australia     To open the on-line enquiry form.

To see the wrightway2MT bin tipper in action.

 SAFETY FEATURES
(standard inclusions on all wrightway2MT® machines):

(i) Possible pinch points eliminated:

•  All moving parts fully guarded, access areas made safe.

•  Finger-proof guarding.

•  Restricted limb access at base of machine.

(ii) Innovative double roller lift and tip mechanism (patented):

•  Moving parts travel inside covered and shielded channels.

•  Weight on the cradle is securely supported by two outside arms.

•  Even weight distribution throughout the lift, empty, lower cycle.

•  Hydraulically driven (no sprocket).

•  Cradle lowered by gravity.

•  Pressure relief valve: cannot be overloaded; controlled lowering speed.

(iii) Integrated safety inter-lock system:

•  Emergency Stop Button Key Switch.

•  Machine cannot operate unless the door is closed.

•  Door cannot be opened unless:

- the machine has been activated;

- the cradle is at ground level (sensors aligned);

- operator is pressing the door release button.

•  Manual door-open over-ride lever within machine (machine cannot operate when over-ride is on).

•  Electric door-open over-ride within Control Box.

(iv) Other:

•  Operator safely located at front of machine.

•  SOP above Control Panel.

•  Recessed Control Panel (push-button switches require constant pressure to operate machine).

•  Battery Charge Indicator.

•  Gel Cell Battery (no maintenance, no fumes).

•  Door opens to 170 degrees.

•  Detailed Operating Manual.

•  Staff Training.

•  12 month Warranty (machine + battery).

•  Safe Power Cord Storage.

RE-LOCATION SAFETY FEATURE
(standard inclusions on all wrightway2MT® machines):

•  Independent brake levers easily accessed &  engaged irrespective of castor direction.

•  Multi-directional castors.

•  Sturdy full width Handle Bar.

•  Easily controlled relocation of machine (handle bar).

•  Dedicated fork-lift pockets.

SAFE, EASY ACCESSIBLE SERVICING & MAINTENANCE
(standard inclusions on all wrightway2MT® machines):

(i) Control Box

•  Located at rear of machine.

•  Specific Key (for use by Authorised Technicians only).

•  Hinged, sealed door (does not require re-sealing to maintain integrity of seal after access).

•  Easy spacious access to all components within for straight-forward servicing.

•  Door-open electrical over-ride switch (if cradle sensors not aligned).

•  Detailed full colour wiring diagram attached inside door.

(ii) Authorised Technicians

• Upon request the Manufacturer will provide a comprehensive service manual or specific instructions prior to working on the machine.

To open the on-line enquiry form.

Download a brochure detailing safety aspects of the wrightway2MT bin tipper

RETURN TO TOP OF PAGE

© Copyright of all content and images on this website page is owned by Wrightway Products and cannot be used without permission from the owner.