COMMON PROBLEMS

SOLUTION

• Exposed and accessible possible pinch points during operation

wrightway2MT® has successfully addressed this problem

All moving parts are guarded. All access areas have been made safe.

• Difficulty applying the brakes on casters when the caster faces away from the exterior of the machine

wrightway2MT®  has successfully addressed this problem

Foot-pedal levers on exterior of frame can be used independent of caster direction.

• Lack of stability when transporting machines by forklift

wrightway2MT®  has successfully addressed this problem

Machine frame includes 2 dedicated fork-lift pockets for stable lift & carry as a standard inclusion on all machines.

• Operator being located at the edge of the dock or beside a skip and loose debris during the emptying process

wrightway2MT®  has successfully addressed this problem

Control Panel and SOP located above door at furthest point from tipping area.

• Unsubstantial door lock and simplistic interlock systems

wrightway2MT®  has successfully addressed this problem

Cat. 3 integrated interlock safety system with Emergency Stop. IP67 on external electrical controls. Sensors must be aligned when the cradle is at ground level before door can open.

• Lack of foot protection at ground level

wrightway2MT®  has successfully addressed this problem

Full guarding including substantial enclosed foot guarding around casters.

• Inability to maintain a constant water-resistant seal after maintenance within control boxes

wrightway2MT®  has successfully addressed this problem

(IP56) Hinged, sealed door which does not require re-sealing to maintain integrity of seal after access.

• Difficulty of working within a highly confined and restricted space inside control boxes

wrightway2MT®  has successfully addressed this problem

All components intentionally located to allow maximum access.